ATD-TFES-2HD Skived PTFE Film Tapes. Teflón™

Description

Self-Wound (without liner)

Pure skived PTFE with a high temp. silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers & slot
liners where good insulation & heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine
pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. High elongation permits tight wrapping; conforms to sharp bends/irregular surfaces. *TFES-2HD is a high density, TENSILIZED skived PTFE film which provides higher tensile strength, lower elongation & higher dielectric strength than regular skived film (primarily used for electrical applications listed above & for roll protection in flat die extrusion). Meets Spec AA-59474 Type-1, Superseding 23594C Type 1. 3” plastic core.

Physical Properties:

Backing Thickness

Total Tape Thickness Break Strength

Adhesion

Elongation

Maximum Operating Temperature Dielectric Strength

Alternative to:​3M

Permacel
​DeWal

St. Gobain
​Taconic

Chemfab
Lanmar
Bondtec

WIDTH​RLS/CS

1/4″​(6.3mm)​144

3/8″​(9.5mm)​96

1/2″​(12.7mm)​72

3/4″​(19.0mm)​48

1″​(25.4mm)​36

1.5″​(38.1mm)​24

2″​(50.8mm)​18

3″​(76.2mm)​12

21.5″​(546mm)​LOG

36″​(914mm)​LOG