Description

Self-Wound (without liner)

Pure skived PTFE with a high temp. silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers & slot
liners where good insulation & heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine
pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. High elongation permits tight wrapping; conforms to sharp bends/irregular surfaces. *TFES-2HD is a high density, TENSILIZED skived PTFE film which provides higher tensile strength, lower elongation & higher dielectric strength than regular skived film (primarily used for electrical applications listed above & for roll protection in flat die extrusion). Meets Spec AA-59474 Type-1, Superseding 23594C Type 1. 3” plastic core.

Physical Properties:

Backing Thickness

Total Tape Thickness Break Strength

Adhesion

Elongation

Maximum Operating Temperature Dielectric Strength

Alternative to:3M

Permacel
DeWal

St. Gobain
Taconic

Chemfab
Lanmar
Bondtec

WIDTHRLS/CS

1/4″(6.3mm)144